When GATE results will be announced and you might have secured a decent rank. Now the main problem is which college or PSU (Public Sector Unit) to apply. If you are from a specific reserved category, you may get more possibilities. Let’s see best college perdition based on their GATE CS AIR (All India Rank) for General category aspirants.
If you are confused with which college to apply, this article may help you in getting an overall overview of every college and PSU. First of all you need to get register in COAP for applying in IITs and CCMT for applying in NIT’s or IIIT’s, even after applying to COAP you have to register to each IIT’s individually. For PSU’s you have to apply individually to each organisation, its registration starts from January onward.
Now if your rank is < 50:
Then you are totally in the best zone.You can get any IIT you want as well you have very high chances of getting any PSU's. Usually if you are planning for good quality research oriented education then you should prefer “IISC Bangalore” but in case you are planning for coding like environment than you should go for IIT Bombay. Both of these institutes have 100% placement records and also if you are willing to pursue Phd from any foreign University you can easily get it. These two are the best institute in India in terms of CSE so other than these two, there is no point of choosing anyother IIT.
Now in case you are planning for PSU, these are some PSU’s hiring from GATE scores are as follows:
- Bhabha Atomic Research Centre (BARC)
- Indian Oil Corporation Limited (IOCL)
- Power System Operation Corporation Ltd. (POSOCO)
- Punjab State Power Corporation Ltd. (PSPCL)
- West Bengal State Electricity Distribution Company Limited (WBSEDCL)
- ONGC Ltd
- DRDO and many more.
If your rank is < 100:
You too can get any IIT for M.tech or MS.But if you are under 80 then only you can be sure to get IISc or IIT-B. Now if in case you didn’t make through these two respective institute, then if you are inclined towards research side than you should definitely choose IIT-Madras but if you interested more towards formal education go for IIT-Delhi. IIT-Madras takes interview for its admission procedure, but IIT-Delhi take direct admissions.
Now in case you are interested to get a job in PSU’s then, according to recent survey at max there are 5 vacancies(some have less than that) in each organisation, and 85% weightage is given to GATE rank and rest 15% to the interview. If your rank is below 40 then you could be sure about getting selected.
If your rank is < 200:
Choose IIT-Madras if you are interested in research otherwise select IIT-Delhi. There is less chances of getting any PSU’s.
If your rank is < 300:
You might get IIT-kharagpur or IIT-Kanpur in the last round of COAP. Here again if you require research work than choose IIT-Kanpur but for formal education you should go for IIT Kharagpur.
If your rank is < 500:
You should apply for IIT-R as its placement records are very good, but if you couldn’t make it go for IIT-G.
If your rank is > 500 and < 1000:
You have two option IIT-Hyderabad or IIT-Indore. M.Tech in IIT-H is much better than MS in IIT-I, but MS in IIT-I is far more better than MS in IIT-H. Also IIT-H provide M.tech in ML.You could also apply for top NIT’s.
If your rank is >1000:
You could get lower NIT’s and IIIT’s.
Last Updated : 06 Feb, 2019
Like Article
Save Article
Share your thoughts in the comments
Please Login to comment...
FAQs
What is the Maximum GATE Score?
| Paper Code | Highest Score | Highest Marks (out of 100) |
|---|
| AE | 1000 | 84.00 |
|---|
| CS | 1000 | 87.81 |
| CY | 996 | 91.33 |
| EC | 1000 | 82.00 |
29 more rowsAns. A GATE rank below 200 can be considered a good rank to get admission to PG courses at various prestigious institutions. However, along with a good GATE rank, aspirants must fulfill the GATE 2024 eligibility criteria.
How many marks is a 700 GATE score? ›
The GATE score of 700 will have different marks in various branches because other criteria also come in to picture but candidates will have 50-60 marks can get 700 scores. If a candidate has a GATE score of 700 he will have to obtain 65 – 70 marks seeing previous years trends.
How many marks is a 300 GATE score? ›
The GATE score of 300 may correspond to different marks in different branches due to the influence of other criteria. However, candidates who score between 25-30 marks can obtain a GATE score of 300.
What is the highest marks in GATE CSE 2024? ›
In the GATE Civil Engineering, the highest rank was shared by Deepak and Bhanu Pratap Singh, who secured raw marks of 87.33 and a GATE score of 989. Candidates can check branch-wise names as well as marks of GATE toppers who secured All India Rank (AIR) 1 at the official website: gate2024.iisc.ac.in/all-india-rank/.
How many marks are required in the GATE for the IIT Delhi CSE? ›
IIT Delhi GATE Cut off 2024 is the minimum score the candidates require to get admission to M. Tech courses offered at the institute. IIT Delhi GATE Cut off 2023 for CSE is 675 for General category, 640 for OBC, and 500 for SC/ST/PwD.
What is the difference between GATE score and all india rank? ›
GATE rank is also known as All India Rank (AIR). A candidate gets his/her GATE rank only for his branch. For example, candidates appearing in the Electrical Engineering paper will get the rank among students who appeared in the same paper only.
What is the minimum GATE score for IIT? ›
In general, based on previous year's GATE cutoff trends for IITs, aspirants should aim for a GATE rank of 200 or lower to have a good chance of admission to IITs. In terms of GATE scores for IIT admissions, the competitive range often falls between 400 and 800.
How much GATE score is considered good? ›
With a score of 93+, candidates can expect an outstanding rank in the Graduate Aptitude Test in Engineering. Marks above 90 are considered good, and those above 93+ are excellent.
How to convert GATE marks into GATE score? ›
The basic difference between GATE marks and score is that the GATE marks are calculated out of 100 and GATE Score is calculated out of 1000. The GATE Score is calculated by taking actual marks and normalized marks into consideration.
What is the difference between GATE score and GATE marks? GATE score is calculated out of 1000 while GATE marks are calculated out of 100. An applicant who wishes to get direct admission into IISC/ IITs must try to score nearly 1000.
Does GATE score matter? ›
Ans. Yes. GATE scores are accepted by some international institutes, including the National University of Singapore (NUS), Nanyang Technological University (NTU) Singapore, Technical University of Germany, and RWTH Aachen University.
How is GATE score calculated? ›
For multiple choice questions, 1 mark is awarded for each correct answer, and 1/3 point is deducted for each wrong answer. There are no negative points for numerical questions. Actual (raw) GATE scores are given for approximately 65 questions out of 100.
What is the meaning of GATE score 350? ›
Tech admission to IITs, a GATE score of under 200 is considered good, whereas a GATE score of between 350 and 800 is considered good for admission to NITs. A few new IITs and IIITs will accept applications for M. Tech admission from candidates with scores between 600 and 800.
What happens if you pass the GATE test? ›
Students passing the test can receive college elective credit that will transfer to most universities. Why should I put my child in the GATE program? If your child if gifted, it means they have the capacity to easily acquire content that is complex.
What is the meaning of 800 score in GATE? ›
However, students having a rank in the range of 600-800 can also get admission into IITs and IIITs. For admission into leading NITs, the students should score a GATE rank in the 350-800 range.
How to calculate the GATE score? ›
For multiple choice questions, 1 mark is awarded for each correct answer, and 1/3 point is deducted for each wrong answer. There are no negative points for numerical questions. Actual (raw) GATE scores are given for approximately 65 questions out of 100.
How many marks is 800 in GATE mechanical engineering? ›
800+ score in GATE (Mechanical) is equivalent to 75 marks out of 100 approximately. So in order to secure the above stated marks you need to do the following things: Study material: Arrange appropriate study material for your preparation.
How to normalize GATE score? ›
The normalisation is based on the essential premise that “in all multi-session GATE papers, the distribution of candidates' abilities is the same across all sessions”. This assumption is proven by the enormous number of applicants who appear in GATE multi-session papers and the random session allocation process.
