15 fabrication operator skills for your resume and career
1. Tape Measure
A tape measure is a flexible ruler used to measure distances and lengths. Fabrication operators use tape measures to examine work pieces, ensure products meet desired standards, and check the quality of products. They use tape measures along with other measuring tools to record accuracy and check the quality of work. They also use tape measures to check cut parts to ensure they are correct thickness and within tolerance.
Here's how fabrication operators use tape measure:
- Examine work piece visually by touch or using tape measure, calipers, or gauges to ensure products meet desired standards.
- Use a wide variety of measuring tools (tape measure, caliper, protractor) to check quality of products.
And if you're looking for a job, here are the five top employers hiring now:
- Pentair Jobs (14)
- Acuity Brands Jobs (11)
- Micron Technology Jobs (11)
- Eaton Jobs (8)
- RESOURCE Jobs (7)
2. Hand Tools
Hand tools are tools that are powered by hand rather than electricity. Fabrication operators use hand tools to perform quality inspections, assemble components, and replace defective circuitry. They also use hand tools such as grinders, nematic wrenches, and sanders.
Here's how fabrication operators use hand tools:
- Performed quality inspections using drawings and hand tools.
- Hand tools including grinders and nematic wrenches and sanders.
3. Calipers
Calipers are measurement instruments that measure the distance between two opposite points. Fabrication operators use calipers to measure the length and angles of materials to ensure they are made according to blueprints. They also use calipers to measure the thickness of materials, ensuring they are within acceptable tolerances. For example, they measure the thickness of metal while sanding to keep it within specifications.
Here's how fabrication operators use calipers:
- Use calipers, squares, protractors to measure angles and lengths of material to insure parts are made to blueprint.
- Fabricated and formed parts, coils and structures according to specifications, using drill, calipers, cutters and saws.
4. Grinders
A grinder is a tool used for shaping and polishing metal. Fabrication operators use grinders to cut down and position rods, repair or fabricate defective parts, and remove high spots. They also use grinders to operate and maintain equipment, such as manual lathes and OD grinders.
Here's how fabrication operators use grinders:
- Certified fork lift operator Daily tasks consist of cutting down and positioning rods, grinders and gantry.
- Operate equipment and power tools, including arc welding and gas welding equipment, grinders, sanders, lathes and saws.
5. MIG
MIG, or Metal Inert Gas, is a type of welding process that uses an inert gas to protect the weld from contamination. Fabrication operators use MIG welding to join metals like aluminum, stainless steel, and steel. They read blueprints to determine design specifications and use MIG welders for minor touch-ups. They also assemble and disassemble parts and use tooling like oxygen/acetylene torches and grinders.
Here's how fabrication operators use mig:
- Offered Mechanical Engineering position - Passed in-house MIG welding evaluation for production quality welding.
- Make small parts out of aluminum, stainless steel and steel*Some blueprint reading *Assembled and disassembled small parts*Welded MIG, Aluminum parts
6. Customer Satisfaction
Customer satisfaction refers to the feeling of satisfaction a customer experiences when their needs and expectations are fulfilled. Fabrication operators use customer satisfaction by working overtime if necessary to ensure that their needs are met.
Here's how fabrication operators use customer satisfaction:
- Work overtime if required to insure customer satisfaction.
Choose from 10+ customizable fabrication operator resume templates
Build a professional fabrication operator resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your fabrication operator resume.
7. ISO
ISO is a set of quality management standards. Fabrication operators use ISO to maintain quality control and follow precise specifications. They work according to ISO 9000 standards and participate in ISO activities. They also use ISO to maintain a safe and efficient workplace.
Here's how fabrication operators use iso:
- Practiced strict quality control using SPC, Lean/Six Sigma and precise ISO standards.
- Helped plant to achieve ISO 9000 Certification by following product specifications and performing in-process inspections.
8. Quality Standards
Quality standards are guidelines or procedures that ensure a product or service meets specific requirements. Fabrication operators use quality standards by running parts in accordance with them, verifying conformance to specified dimensions, and completing assigned fabrication requests while maintaining the highest possible quality. They also maintain quality standards according to customer specifications. For instance, they might program and run parts in line with these standards.
Here's how fabrication operators use quality standards:
- Program and run parts in accordance to quality standards.
- Maintain quality standards by approving material at in-process inspection for all products verify conformance to specified dimensions.
9. PPE
PPE stands for personal protective equipment, which includes things like hardhats, safety glasses, and steel-toed boots. Fabrication operators use PPE to protect themselves from hazards while working with sharp edges and cutting tools. They also follow safety regulations and protocols like 5S to ensure a safe working environment. For example, one fabrication operator wrote that they "maintained and ensured proper use of PPE" to prevent injuries.
Here's how fabrication operators use ppe:
- Lean Six Sigma, 5S protocols, use of PPE and other safety regulations.
- Work with chemicals and gases, wear proper PPE * Resolve customers problems with limited scope, promptly.
10. Punch Press
A punch press is a machine tool used to create holes or shapes in sheet metal. Fabrication operators use punch presses to perform various tasks like cutting, shaping, and forming metal. They set up, adjust, and operate these machines to create the desired metal parts and products.
Here's how fabrication operators use punch press:
- Run various small scale punch presses for the fabrication department.
- Press Brake Operator Turret Press Operator 500 Ton Punch Press Operator
11. Laser
Laser is a device that produces an intense beam of light. Fabrication operators use lasers to cut and shape various materials, such as metal and plastic. They operate laser machines to fabricate parts according to specifications on blueprints and use software to program the lasers for optimal performance. For example, they might use the Trump L3030 laser with Tru Tops Cad/Cam nesting software to cut hoods for transformers.
Here's how fabrication operators use laser:
- Operated a Laser to fabricate parts according to specifications on blue prints.
- Operated laser and turret machines to cut hoods for transformers.
12. Aluminum
Aluminum is a lightweight, corrosion-resistant metal. Fabrication operators use aluminum to create various products, from doors and windows to electronic components. They may use saws, plasma cutters, and other tools to cut and shape aluminum into the desired form, and read blueprints to ensure the final product meets customer requirements. They may also stack aluminum for shipping and optimize raw materials during processing to minimize waste.
Here's how fabrication operators use aluminum:
- Remove aluminum from paint line and stack metal for shipping.
- Used aluminum welder plasma cutter for doors, etc.
13. Spot Welding
Spot welding is a process that uses electrical current to heat metal parts until they melt and fuse together. Fabrication operators use spot welding to join various metal parts and components. They may operate spot welding equipment, perform quality inspections, and grind or buff the metal parts as needed. They may also use spot welding to assemble electrical boxes and perform other production steps in the sub-assembly department.
Here's how fabrication operators use spot welding:
- Make parts according to blue print Forklift operation and some spot welding
- Assist with high-volume spot welding on refrigerator products Trained in house and learned how to tig weld augurs for ice machines.
14. Tig Welding
TIG welding is a process of joining two pieces of metal by heating them in a shielded atmosphere. Fabrication operators utilize this process in their work by setting up and operating semi-automatic TIG welding operations. They also cross-train for TIG welding to broaden their skill set.
Here's how fabrication operators use tig welding:
- Cross train for TIG Welding.
- Set up and operate semi automatic SS TIG welding operations.
15. Hoists
Hoists are machines used to lift and lower heavy materials. Fabrication operators use hoists to lift and move materials and finished products. They use hoists to hang parts on paint lines, lift raw materials, and position and secure machine parts on surface plates or worktables.
Here's how fabrication operators use hoists:
- Lift or move material and finished products using large over head cranes or hoists.
- Use of forklifts, pallet jacks and overhead hoists.
5 Fabrication Operator Resume Examples
Build a professional fabrication operator resume in minutes. Browse through our resume examples to identify the best way to word your resume. Then choose from 5+ resume templates to create your fabrication operator resume.
Create My Resume
Build a professional resume in minutes using this template.
What skills help Fabrication Operators find jobs?
Tell us what job you are looking for, we’ll show you what skills employers want.
