Updated February 16, 2024
8 min read
Piping engineers are engineering professionals who are responsible for the creation of piping systems that transport materials such as oil, gas, water, and waste from one location to another. These engineers are required to draw the blueprints for the system and then assist in selecting materials that are used to build the pipes and other piping components. They must travel to the installation site of the piping system and conduct surveys on the land for any irregularities. Piping engineers must also participate in cost management meetings with decision-makers to ensure proper budget allocation for the project.
On This Page
Piping engineer responsibilities
Here are examples of responsibilities from real piping engineer resumes:
- Manage and maintain CADWorx databases, verify data accuracy, and create reports and queries.
- Manage Jenkins security by providing specific access to authorize developers/testers using project base matrix authorization strategy.
- Oversee both utility and process piping and supports using AutoCAD, CadWorx, CloudWorx and AutoPLANT.
- Attend meetings conducting 3D model reviews utilizing Navisworks 2014 for both clients.
- Design pharmaceutical piping plans and isometrics of USP water systems using AutoCAD 2000I.
- Check and approve deliverable ISO to ensure customer satisfaction with the appropriate MTO.
- Conduct field inspections, record keeping, RFI, and travele to jobsites.
- Create scope of work for estimating purposes as well as sketch drawings and designs.
- Check the PFD's on design and flow to equipment and chemical processing units.
- Develop conceptual design packages for plant expansions with Moore DCS & Honeywell PLC'S.
- Verify and authorize deliverable ISO to ensure quality standard while meetings customer satisfaction with the appropriate MTO.
- Evaluate software programs (CADDPIPE, CADWORX, and Rebis) to assist in the selection of software.
- Make field trips to plant to do walk downs, sketch and take pictures of new piping projects.
- Locate support locations and input calculated Caesar stress loads at support locations within the PDMS model for the piping system.
- Used PDMS software in various piping activities such as modeling, generating fabrication drawings, material take-off and model review.
Piping engineer skills and personality traits
We calculated that 8% of Piping Engineers are proficient in CAD, Engineering Design, and API. They’re also known for soft skills such as Creativity, Listening skills, and Mechanical skills.
We break down the percentage of Piping Engineers that have these skills listed on their resume here:
- CAD, 8%
Skilled in Auto Cad 2007 and Excel spreadsheets; familiar with Pipe Stress Analyses Cesar 2 and other software.
- Engineering Design, 8%
Performed complex engineering design and analysis and provided technical leadership.
- API, 7%
Provide technical specifications of materials based on ASME B31.1, API and AWWA Prior for purchase, fabrication, and installation.
- Pipe Stress Analysis, 6%
Pipe stress analysis and troubleshooting of piping and mechanical facilities of Isfahan Oil Refinery.
- Caesar II, 6%
Conduct pipe stress engineering of piping systems as per ASME, ANSI B31.3code needs using Caesar II software program.
- Equipment Layout, 4%
Developed plot plans, equipment layouts, bill of materials for proposal, pipeline routing for development and general arrangement drawings.
Most piping engineers use their skills in "cad," "engineering design," and "api" to do their jobs. You can find more detail on essential piping engineer responsibilities here:
All piping engineer skills
The three companies that hire the most piping engineers are:
- Affiliated Engineers20 piping engineers jobs
- Stantec14 piping engineers jobs
- Burns & McDonnell8 piping engineers jobs
Choose from 10+ customizable piping engineer resume templates
Build a professional piping engineer resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your piping engineer resume.Don't have a professional resume?
Compare different piping engineers
Piping engineer vs. Research and development engineer
Research and development engineers generally execute research and tests on product ideas, develop new products, and perform redesigns. They are employed in many industries, including manufacturing, electrical, and science-based companies. Their duties vary and depend on the industries they work in. Responsibilities of these engineers include developing new technologies, designing products, and managing the projects until they are completed. Additionally, they lead the project team members to manage their schedules, design the project plans, and collaborate with key departments in developing new products.
The annual salary of research and development engineers is $7,263 lower than the average salary of piping engineers.
Even though piping engineers and research and development engineers are distinct careers, a few of the skills required for both jobs are similar. For example, both careers require cad, api, and technical support in the day-to-day roles and responsibilities.
These skill sets are where the common ground ends though. The responsibilities of a piping engineer are more likely to require skills like "engineering design," "pipe stress analysis," "caesar ii," and "oil gas." On the other hand, a job as a research and development engineer requires skills like "python," "r," "c #," and "solidworks." As you can see, what employees do in each career varies considerably.
Research and development engineers really shine in the technology industry with an average salary of $107,654. Comparatively, piping engineers tend to make the most money in the energy industry with an average salary of $121,118.
The education levels that research and development engineers earn slightly differ from piping engineers. In particular, research and development engineers are 6.9% more likely to graduate with a Master's Degree than a piping engineer. Additionally, they're 3.2% more likely to earn a Doctoral Degree.
Piping engineer vs. Product development engineer
A Product Development Engineer is responsible for creating and testing new product designs. They collaborate with market researchers to evaluate market needs, existing competition, and potential costs.
Product development engineer positions earn lower pay than piping engineer roles. They earn a $21,357 lower salary than piping engineers per year.
A few skills overlap for piping engineers and product development engineers. Resumes from both professions show that the duties of each career rely on skills like "cad," "hvac," and "technical support. "
While some skills are similar in these professions, other skills aren't so similar. For example, resumes show us that piping engineer responsibilities requires skills like "engineering design," "api," "pipe stress analysis," and "caesar ii." But a product development engineer might use other skills in their typical duties, such as, "solidworks," "product development," "project management," and "data analysis."
Product development engineers earn a lower average salary than piping engineers. But product development engineers earn the highest pay in the technology industry, with an average salary of $86,062. Additionally, piping engineers earn the highest salaries in the energy with average pay of $121,118 annually.
Product development engineers earn similar levels of education than piping engineers in general. They're 4.0% more likely to graduate with a Master's Degree and 3.2% more likely to earn a Doctoral Degree.
Piping engineer vs. Research engineer
Research Engineers are responsible for a wide range of duties, including researching and developing new technologies and prototypes, and finding solutions to improve techniques, procedures, and technologies.
On average, research engineers earn lower salaries than piping engineers, with a $10,487 difference per year.
Using the responsibilities included on piping engineers and research engineers resumes, we found that both professions have similar skill requirements, such as "cad," "p id," and "technical support.rdquo;
There are many key differences between these two careers, including some of the skills required to perform responsibilities within each role. For example, a piping engineer is likely to be skilled in "engineering design," "api," "pipe stress analysis," and "caesar ii," while a typical research engineer is skilled in "python," "c #," "java," and "software development."
Research engineers earn the best pay in the start-up industry, where they command an average salary of $141,240. Piping engineers earn the highest pay from the energy industry, with an average salary of $121,118.
Most research engineers achieve a higher degree level compared to piping engineers. For example, they're 11.6% more likely to graduate with a Master's Degree, and 8.3% more likely to earn a Doctoral Degree.
Piping engineer vs. Mechanical design engineer
A mechanical design engineer specializes in designing various mechanical devices that will be vital in developing machinery or large structures. One of their primary responsibilities revolves around conducting thorough research and analysis, establishing layouts and prototypes, producing progress reports, and working alongside fellow engineers and skilled professionals. Typically assigned in an office setting, a mechanical design engineer must visit construction sites or factories to test and observe equipment qualities. Furthermore, during production, there are instances when a mechanical engineer must coordinate with suppliers, contractors, and clients.
Mechanical design engineers typically earn lower pay than piping engineers. On average, mechanical design engineers earn a $31,611 lower salary per year.
While both piping engineers and mechanical design engineers complete day-to-day tasks using similar skills like cad, engineering design, and api, the two careers vary in some skills.
While some skills are required in each professionacirc;euro;trade;s responsibilities, there are some differences to note. "pipe stress analysis," "caesar ii," "oil gas," and "equipment layout" are skills that commonly show up on piping engineer resumes. On the other hand, mechanical design engineers use skills like mechanical design, gd, creo, and fea on their resumes.
The automotive industry tends to pay the highest salaries for mechanical design engineers, with average annual pay of $87,483. Comparatively, the highest piping engineer annual salary comes from the energy industry.
In general, mechanical design engineers hold similar degree levels compared to piping engineers. Mechanical design engineers are 0.3% more likely to earn their Master's Degree and 0.2% less likely to graduate with a Doctoral Degree.
Types of piping engineer
- 2-4 yearsProject EngineerAverage Salary: $75,050Bachelor's DegreeAvailable Jobs: 58,605How To Become a Project Engineer
- 2-4 yearsDesign EngineerAverage Salary: $77,134Bachelor's DegreeAvailable Jobs: 39,318How To Become a Design Engineer
- 2-4 yearsMechanical EngineerAverage Salary: $75,352Bachelor's DegreeAvailable Jobs: 29,639How To Become a Mechanical Engineer
- 2-4 yearsLead EngineerAverage Salary: $84,927Bachelor's DegreeAvailable Jobs: 10,279How To Become a Lead Engineer
- 2-4 yearsResearch And Development EngineerAverage Salary: $100,169Bachelor's DegreeAvailable Jobs: 8,400How To Become a Research And Development Engineer
- 2-4 yearsStaff EngineerAverage Salary: $107,530Bachelor's DegreeAvailable Jobs: 7,977How To Become a Staff Engineer
Updated February 16, 2024
Zippia Team
Editorial Staff
The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.
What Similar Roles Do
- What a Design Engineer Does
- What a Development Engineer Does
- What an Engineer Does
- What an Equipment Engineer Does
- What a Facility Engineer Does
- What a Lead Engineer Does
- What a Mechanical Design Engineer Does
- What a Mechanical Engineer Does
- What a Piping Designer Does
- What a Principal Engineer Does
- What a Product Design Engineer Does
- What a Product Development Engineer Does
- What a Product Engineer Does
- What a Project Engineer Does
- What a Research And Development Engineer Does
Piping Engineer Related Careers
- Design Engineer
- Development Engineer
- Engineer
- Equipment Engineer
- Facility Engineer
- Lead Engineer
- Mechanical Design Engineer
- Mechanical Engineer
- Piping Designer
- Principal Engineer
- Product Design Engineer
- Product Development Engineer
- Product Engineer
- Project Engineer
- Research And Development Engineer
Piping Engineer Related Jobs
- Design Engineer
- Development Engineer
- Engineer
- Equipment Engineer
- Facility Engineer
- Lead Engineer
- Mechanical Design Engineer
- Mechanical Engineer
- Piping Designer
- Principal Engineer
- Product Design Engineer
- Product Development Engineer
- Product Engineer
- Project Engineer
- Research And Development Engineer
Resume For Related Jobs
- Design Engineer Resume
- Development Engineer Resume
- Engineer Resume
- Equipment Engineer Resume
- Facility Engineer Resume
- Lead Engineer Resume
- Mechanical Design Engineer Resume
- Mechanical Engineer Resume
- Piping Designer Resume
- Principal Engineer Resume
- Product Design Engineer Resume
- Product Development Engineer Resume
- Product Engineer Resume
- Project Engineer Resume
- Research And Development Engineer Resume